A-TEC A12 Shotgun Suppressor

Home > Firearms > Suppressors > Suppressors for Shotguns >

Alternative Views:

Our Price: CHF 680.00 inkl. MwSt.

Quantity in Stock:5
Availability: Usually Ships in 24 Hours
Product Code: ATEC-A12

Choke:

Qty:

Description

Technical Specs

Extended Information

The A-TEC A12 can be fitted to any 12ga pump-action or semi-auto shotgun with choke system.

One choke is included. Please choose the choke that fits your gun.

Warning: A-TEC A12 is ONLY approved for wadded 12 ga. ammunition, max 42g. US #2 or smaller shot size.

Do not use slugs or reloaded ammunition.

A-TEC A12

Features
Prior to use of the A12, the choke must be mounted correctly in the silencer.

Check that the two front screws and two backend screws are tight and that there are no foreign objects inside the silencer.
Check that you have the correct choke by trying it gently by hand in your barrel.
Screw the A12 choke all the way to the bottom of the threads in the A12 silencer..
Firmly tighten the lock nut with the supplied tools.
Screw the A12 silencer with choke attached on to your barrel.
Loosen the check nut.
Adjust the silencer to desired "clock" position.
Tighten the lock nut.

Dismantling for cleaning:

Unscrew the two screws on the front end of the A12 silencer with a 3 mm hex key.
Use your hand or a rubber/plastic mallet (gently) to push the inner tube until the back comes away from the sleeve.
Pull out the contents from the back.

The silencer is supplied as standard with one "modified" choke tube. The following choke types are currently available:

Mobilchoke (Beretta, Benelli, Franchi)
Crio Plus (Benelli)
Invector (Mossberg, older Winchesters, Weatherby)
Invector Plus (Winchester, Browning)
Optima HP (Beretta)
Remington (870, 1100)

Share your knowledge of this product. Be the first to write a review »